激波与椭圆形重气柱相互作用的PLIF实验

在水平激波管中,采用平面激光诱发荧光(planar laser-induced fluorescence, PLIF)方法对椭圆形重气柱界面的Richtmyer-Meshkov不稳定性进行实验。气柱由SF₆混入一定比例的丙酮蒸气构成,环境气体为空气。通过改变椭圆形气柱的长短轴比值,得到了激波马赫数为1.25时,3种初始界面的演化形态。通过相对体积分数标定,得到了界面失稳演化过程中的相对体积分数分布,观察到了激波作用后界面气体聚集、转移、消散等现象。实验结果发现,对于流向轴长与展向轴长之比较大的气柱界面,初始界面产生的涡量更大且分布更广,其界面不稳定性发展得越迅速和剧烈。失稳发展迅速的界面甚至出现涡对碰撞并产生尾部射流结构的现象。初始界面直接决定了失稳发展初期形成的涡对强度和间距,并对后期演化有重要影响。     

低分子量含氟聚合物的制备、官能化及特性

低分子量含氟聚合物是重要的新型功能材料,在国防工业中占有特殊地位。同时,作为高科技战略物资,近年来逐渐成为研究热点。本文对低分子量含氟聚合物的制备方法、官能化及特性进行了综述,重点介绍了低分子量含氟聚合物的制备和官能化方法的研究进展,并总结和详细介绍了低分子量含氟聚合物的特性,最后对该领域的前景和发展方向进行了展望。     

Zinc Recovery from Wulagen Sulfide Flotation Plant Tail by Applying Ether Amine Organic Collectors

Separating oxidized zinc minerals from flotation tailings is always a challenge. In this study, a flotation tailing from Wulagen zinc mine in China (Zn grade < 1%) was processed using froth flotation with combinations of amines (OPA 10, OPA 1214, OPA 13, DDA) and Na₂S to study the effects of these amines on the zinc recovery as well as their interactions with other reagents, aiming to screen out a proper reagent scheme to improve zinc separation from extremely low-grade zinc flotation tailings. The results show that different amines led to different flotation performance, and the collectors were ranked as OPA 1214, OPA 13, OPA 10 and DDA in a decreasing order based on flotation collectivity and selectivity. An increase in the concentration of each collector increased the zinc recovery but reduced the concentrate zinc grade. Interactions were also observed between different amines and Na₂S and Na₂SiO₃, and OPA 1214 outdid the others in saving the usage of both the Na₂S and Na₂SiO₃. The measured adsorption of collector onto smithsonite was found to correlate well with flotation test results. It was concluded that hydrocarbon chains can be held accountable for the difference in the flotation performance with different amines. The longer the hydrocarbon chain, the stronger the hydrophobic association ability of amine, which is conducive to the selective amine adsorption onto sulfurized smithsonite particles and hence the smithsonite flotation.     

扩散型气柱界面R-M失稳中混合率的实验研究

Richtmyer-Meshkov(R-M)不稳定性普遍存在于众多工程问题中,激波管实验是研究R-M失稳问题的主要手段.高精度的平面激光诱导荧光(planar laser-induced fluorescence,PLIF)技术具有分子量级的示踪能力,可获得界面气体浓度(摩尔分数)分布,为研究界面失稳混合问题提供了有力工具.在弱激波(Ma=1.25)冲击扩散型气柱界面实验中,采用PLIF技术对R-M失稳引起的SF6-Air界面混合问题进行了研究.通过改变椭圆形初始界面的长短轴比,得到了3种扩散型初始界面失稳演化过程中气体摩尔分数,观察到了斜压机制下界面的简单拉伸、二次不稳定性、挤压射流等现象.利用浓度分布进一步得到了界面的瞬时混合率,通过瞬时混合率、界面整体平均混合率以及混合率的概率密度分布,分析了界面在不同演化阶段的界面混合特征,初步讨论了界面失稳混合的机制.演化初期,界面在斜压涡的作用下发生拉伸卷曲,通过增大浓度梯度来促进界面的混合.当演化进一步发展,二次不稳定性出现后,界面通过小尺度对流的方式达到湍流混合状态,而浓度梯度驱使的分子间混合逐渐减弱.由浓度梯度引起的扩散与由二次不稳定性引起的对流存在着"竞争"关系,二者共同主导了界面的混合.     

PMT overshoot study for the JUNO prototype detector

The quality of PMT signals is crucial for large-size and high-precision neutrino experiments, but most of these experiments are affected by the overshoot of PMT signals from the positive HV-single cable scheme. Overshoot affects the trigger, dead time and charge measurement from a detector. For the JUNO prototype detector, we have performed a detailed study and calculation on PMT signal overshoot to control the ratio of overshoot to signal amplitude to ~1%, with no effect on other PMT parameters.     

A Mixed Analytical/Numerical Method for Velocity and Heat Transfer of Laminar Power-Law Fluids

This paper presents a relatively simple numerical method to investigate the flow and heat transfer of laminar power-law fluids over a semi-infinite plate in the presence of viscous dissipation and anisotropy radiation. On one hand, unlike most classical works, the effects of power-law viscosity on velocity and temperature fields are taken into account when both the dynamic viscosity and the thermal diffusivity vary as a power-law function. On the other hand, boundary layer equations are derived by Taylor expansion, and a mixed analytical/numerical method (a pseudo-similarity method) is proposed to effectively solve the boundary layer equations. This method has been justified by comparing its results with those of the original governing equations obtained by a finite element method. These results agree very well especially when the Reynolds number is large. We also observe that the robustness and accuracy of the algorithm are better when thermal boundary layer is thinner than velocity boundary layer.     

Scalar Resonance at 750 GeV as Composite of Heavy Vector-Like Fermions

We study a model of scalars which includes both the SM Higgs and a scalar singlet as composites of heavy vector-like fermions. The vector-like fermions are bounded by the super-strong four-fermion interactions. The scalar singlet decays to SM vector bosons through loop of heavy vector-like fermions. We show that the surprisingly large production cross section of di-photon events at 750 GeV resonance and the odd decay properties can all be explained. This model serves as a good model for both SM Higgs and a scalar resonance at 750 GeV.     

Fluorescence and HPLC Detection of Hydroxyl Radical by a Rhodamine-Nitroxide Probe and its Application in Cell Imaging

A rhodamine nitroxide probe was designed to detect the hydroxyl radical (·OH), which presented high selectivity for ·OH over other reactive oxygen species (ROS) and linear fluorescence response to ·OH produced by Fenton reaction. The product was detected by HPLC-MS, indicating that the main product of the reaction was O-methylhydroxylamine and the product peak areas measured by HPLC-UV/vis and HPLC-FLD both enhanced proportionally with the increase of ·OH concentration. The application of the probe in biological system was explored to trace the production of ·OH in cells under oxidative stress condition induced by rotenone which can inhibit the mitochondria respiratory chain complex I and we found that appropriate rotenone may induce the normal human liver cells (L02) and human hepatoma cells (HepG2) to produce ·OH at different degrees.     

Laser direct imaging of transparent indium tin oxide electrodes using high speed stitching techniques

To accomplish an electrode patterning in large area, we present a high speed stitching technique used in an ultraviolet laser processing system and investigate the interaction between laser beams and indium tin oxide (ITO) thin films deposited on glass substrates. After optimizing the process parameters of the laser direct imaging (LDI) for the large-area electrode patterning, the ablated lines looked like regularly fish-scale marks of about a 40 μm diameter and a 120 nm depth around the processing path. The parameters includes the laser power of 1W, the scanning speed of galvanometers of 800 mm/s, and the laser pulse repetition frequency of 50 kHz. Moreover, the resistance value of the ablated ITO thin film is larger than 200MΩ that is electrically insulated from the other regions of electrode structure. LDI technology with UV laser beam has great potential applications in patterning on wafer or sapphire substrates and patterning a conductive layer deposited on the touch panels for semiconductor and optoelectric industries, respectively.     

Ferromagnetic-insulators-modulated transport properties on the surface of a topological insulator

Transport properties on the surface of a topological insulator （TI） under the modulation of a two-dimensional （2D） ferromagnet/ferromagnet junction are investigated by the method of wave function matching. The single ferromagnetic barrier modulated transmission probability is expected to be a periodic function of the polarization angle and the planar rotation angle, that decreases with the strength of the magnetic proximity exchange increasing. However, the transmission probability for the double ferromagnetic insulators modulated n-n junction and n-p junction is not a periodic function of polarization angle nor planar rotation angle, owing to the combined effects of the double ferromagnetic insulators and the barrier potential. Since the energy gap between the conduction band and the valence band is narrowed and widened respectively in ranges of 0 ≤ 0 〈π/2 and r/2 〈 0 ≤ π, the transmission probability of the n-n junction first increases rapidly and then decreases slowly with the increase of the magnetic proximity exchange strength. While the transmission probability for the n-p junction demonstrates an opposite trend on the strength of the magnetic proximity exchange because the band gaps contrarily vary. The obtained results may lead to the possible realization of a magnetic/electric switch based on TIs and be useful in further understanding the surface states of TIs.